GMV-2F Precision Milling Machine

GMV-2F Precision Milling Machine

$16,080 (USD)

Little Rock, AR

orCall 1 501-897-1110

Description

Stock, Subject Prior to Sale Machine Construction Bed Ways Spindle Milling Head Gear and Quill Machine Features SPECIFICATIONS AND CONDITION ARE CORRECT TO THE BEST OF OUR KNOWLEDGE AND ARE SUBJECT TO YOUR VERIFICATION AND CORRECTION. THE CONDITION OF THE MACHINE IS AS IT HAS BEEN REPRESENTED TO US. ALL MACHINES ARE SUBJECT TO PRIOR SALE. EVERY MACHINE, UNLESS OTHERWISE SPECIFIED, IS OFFERED SUBJECT TO OUR GUARANTEE THAT IF FOUND TO BE MECHANICALLY UNSATISFACTORY WITHIN 30 DAYS AFTER SHIPMENT, SAME MY BE RETURNED, FREIGHT PREPAID FOR FULL CREDIT OR REPAIRED AT DEALER’S OPTION. ALL MACHINES RETURNED TO US MUST BE IN AS GOOD A CONDITION AS WHEN SHIPPED.

Specifications

ManufacturerGANESH
ModelGMV-2F
ConditionUsed
Table size w x l9" x 50"
T-slot width / quantity5/8" / 3
Table load capacity440 Pounds
Table load capacity (evenly distributed)900 Pounds
Table surface for floor dimension32" - 48"
Table travel with power feed33.07"
Cross travey - y axis12"
Vertical knee trave - z axis16"
Overarm (ram) travel12"
Spindle nose-to-table surface0" - 18.5"
Spindle centerline to column face6.75" - 18.75"
Leadscrews with ground pitch surface (x & y)0.200" per rev. (ballscrews optional)
Adjustable scale ring display resolution0.001"
Ways - x, y, 7 z axis - hard chrome platedHardened & Ground Dovetail Ways
Spindle headVari-Speed
Spindle motor3-HP, 3-Phase 220 vac
Spindle taper (hardened & ground)R-8
Spindle runout0.00008" maximum runout
Spindle bearings - abec-7 matched setClass-7 bearings
Variable speed spindle60 - 4,500 RPM
Head tilt (left-to-right)90 Degrees - 0 - 90 Degrees
Head tilt (front-to-back / up-down)+45 Degrees - 0 - -38 Degrees
Quill diameter3-3/8"
Quill travel - manual & powered feed5"
Quill feeds - with trip release - inch0.0015", 0.003", 0.006"
Quill feeds - with trip release - metric0.04mm, 0.08mm, 0.16mm
Machine weight2,222 Pounds
Electrical requirements220 vac, 3-Phase, 60 Hz., 9.5 amps
Machine layoutWidth: 58", Depth: 63" - 75", Height: 79"