New Piranha PII 140 Dual Operator Hyraulic Ironworker

New Piranha PII 140 Dual Operator Hyraulic Ironworker

$88,995 (USD)

Location:Little Rock, AR

orCall 1 501-897-1110

Description

Ask for quote to verify pricing. Delivery: Stock, TBD Terms: Net before Shipment 1. Mechanical Stripper Attachment- keeps material flat through the punching process, eliminating distortion. The shorter required stroke gives you a faster punching cycle. 2. Automatic Urethane Hold-downs- clamps and releases material automatically with each stroke. Part movement is eliminated by clamping the part throughout the entire shearing cycle. 3. Visibility- a direct line of sight over the hold down bar allows the operator to easily and accurately line up cuts to the shear blades. 4. Flat Bar Shear- the low rake angle shear design results in flatter and higher quality sheared parts. Shear blades have four useable edges giving you a longer life and less expensive blades. 5. Angle Shear- the floating upper blade seats in the center of the angle prior to cutting minimizing distortion giving you a higher quality cut. 6. Copper Notcher- the low rake angle keeps part flat and under control during notching. Standard Equipment Automatic Hold Down Punch Holder, Stripper, & Die Block 5 Punch & Die Sets 9/16” through 1-1/16” Set of Angle Knives Set 1-1/4” Round Bar Knives Set of 16-5/8” Plate Shear Knives Coupling Wrench Chip Bucket Extra Filter Element Two (2) Foot Switches Instruction/Parts Book/Video Link Set of Copper Knives **Available Options With Pricing Will Be Included In Quotation** PRICE AND SPECS ARE SUBJECT TO CHANGE WITHOUT NOTICE. SMF CAN OFFER FINANCING OPTIONS FOR YOUR PURCHASE, ASK YOUR SALESMAN FOR DETAILS. IF MACHINE SHIPS FORM LITTLE ROCK, AR ADDITIONAL FREIGHT CHARGES WILL APPLY.

Specifications

ModelPII 140
ConditionNew
Punching (140 tons)1-3/8” diameter through 1-1/4” plate
Throat depth20.5”
Bending (optional)18" up to 48" w/4-way die block
Round bar shear1/2" through 2"
Square bar shear1/2” through 1-3/8”
Flat bar shear20” x 1/2”, 18” x 3/4”, 14” x 1”
Angle shear6” x 6” x 5/8”
Coping/notching4” x 6” x 3/8”
Motor20 HP
Weight11,930 Lbs.