New Piranha P 110 Hydraulic Ironworker

New Piranha P 110 Hydraulic Ironworker

$43,995 (USD)

Location:Little Rock, AR

orCall 1 501-897-1110


Ask for quote to verify pricing. Delivery: Stock, TBD Terms: Net before Shipment 1. Urethane Stripper Attachment- keeps material flat through the punching process, eliminating distortion. The shorter required stroke gives you a faster punching cycle. 2. Automatic Urethane Hold-downs- clamps and releases material automatically with each stroke. Part movement is eliminated by clamping the part throughout the entire shearing cycle. 3. Visibility- a direct line of sight over the hold down bar allows the operator to easily and accurately line up cuts to the shear blades. 4. Flat Bar Shear- the low rake angle shear design results in flatter and higher quality sheared parts. Shear blades have four useable edges giving you a longer life and less expensive blades. 5. Angle Shear- the floating upper blade seats in the center of the angle prior to cutting minimizing distortion giving you a higher quality cut. 6. Coper Notcher- the low rake angle keeps part flat and under control during notching. 7. Quick Change Tooling– the unique Piranha dovetail design allows for quick installation and removal of all standard and optional tools. Standard Equipment Automatic Hold Down Punch Holder, Stripper, & Die Block 5 Punch & Die Sets 9/16” through 1-1/16” Set of Angle Knives Set 1-1/4” Round Bar Knives Set of 16-5/8” Plate Shear Knives Set of Coper Knives Coupling Wrench 3/8” Allen Wrench Set of Chip Buckets Extra Filter Element Foot Switch Instruction/Parts Book/Video Link **Available Options With Pricing Will Be Included In Quotation** PRICE AND SPECS ARE SUBJECT TO CHANGE WITHOUT NOTICE. SMF CAN OFFER FINANCING OPTIONS FOR YOUR PURCHASE, ASK YOUR SALESMAN FOR DETAILS. IF MACHINE SHIPS FORM LITTLE ROCK, AR ADDITIONAL FREIGHT CHARGES WILL APPLY.


ModelP 110
Punching (110 tons)1-7/16” diameter through 1” plate
Throat depth12”
Bending (optional)12” up to 24” w/4-way die block
Round bar shear1/2” through 2”
Square bar shear1/2” through 1-3/8”
Flat bar shear20” x 1/2”, 18” x 3/4”, 12” x 1”
Angle shear6” x 6” x 5/8”
Coping/notching4” x 6” x 3/8”
Motor10 HP
Weight5,800 Lbs.