One New PRIMELINE 260 x 12 Platinum Package Hydraulic Press Brake, Downstroking Type
Specifications
Capacity - tons - 260
Bending length - overall - 145.67"
Distance between housings - 127.95"
Stroke - adjustable (including screw adjustment) - 11.03"
Speeds of ram - inches per second:
Aproach - 3.54
Bend - .35
Return - 2.17
Throat depth - 12.20"
Motor HP - 30
Tank capacity - gallons - 68.69
Dimensions - approximately L x W x H - 157.48 x 66.73 x 106.3"
Weight - lbs. - approximately 30,900
Machine Features/Standard Equipment:
Downstroking moving beam (ram)
Fully hydraulic design and operation, utilizing two
hydraulic cylinders
Cylinder pistons ground, hard-chrome plated and
ground a second time for precision and
maximum life
High volume pump
Adjustable working pressure and pressure regulating
gauge
All-steel, monoblock construction
Torsion bar for ram parallelism
Infinitely adjustable mechanical depth stops, push-
button operated with electronic digital readout
Two-speed ram advance (hi/low)
Controls in a swivelling console on the machine, a
movable pedestal with two-hand control, foot
control, and emergency stop control
Two front support arms adjustable left-to-right on the
dovetail
Sheet metal safety guards at back and sides of the
machine
Electrics for 3/60/220 or 3/60/440 with controls as
indicated above. Low voltage at the controls.
Flush floor mount
Safety limit switches for minimum and maximum
settings of travel in power ram adjustment
and power front operated backgauge
The Tooling Included Features:
Upper beam set up to hold American style forming
punches with standard safety tongue (drawing
on request)
One gooseneck forming punch and one multiple-
opening lower die (drawings on request)
One each lower die holder for American lower dies
Font-to-back wedge arrangement in bed for die
compensation
The Backgauge Included Features:
Programmable power backgauge with aluminum
rail bar for easy, smooth operation
Manual R axis (height of back stops)
Manual Z axis (side-to-side adjustment of backgauge
stops)
The Control:
Elgo 200 step programmable control for X axis position
(backgauge front to back for flange dimensions)
and for Y axis position (ram depth for bend angle
position)
Price:$92,000.00
Delivery: Stock, Subject to Prior Sale
Terms: Net before Shipment
F.O.B.: White Marsh, MD
PLEASE NOTE:
The machine quoted here includes electrical components that will
handle a voltage variance of +/- 5% from 220/440 volt. If your true
incoming voltage under load exceeds this range, please advise upon
ordering and the proper components will be sent (may require extra
charge, depending on actual voltage); or, you will be subject to
and additional handling charge if new components must be shipped
at a later date.
SAFETY:
Comprehensive press brake operator training programs which include
safety instructions are your best protection against employee injury
which, in addition to the human cost of bodily injury and poor morale,
significantly increase your operating expenses. However, operator
safety programs must be supplemented by press brakes which are safe
to operate. PRIMELINE press brakes have been designed with the
operator's safety in mind. PRIMELINE press brakes offer ADDITIONAL
FEATURES, which can be purchased to enhance the safety of your
operators.
Sincerely,
Sales
SMF & Machine Tools
ALL MACHINES ARE SUBJECT TO PRIOR SALE. EVERY MACHINE, UNLESS OTHERWISE SPECIFIED, IS OFFERED SUBJECT TO OUR GUARANTEE THAT IF FOUND TO BE MECHANICALLY UNSATISFACTORY WITHIN 30 DAYS AFTER SHIPMENT, SAME MAY BE RETURNED, FREIGHT PREPAID FOR FULL CREDIT. ALL MACHINES RETURNED TO US MUST BE IN AS GOOD A CONDITION AS WHEN SHIPPED.
Return to Available Tools