One Preowned Geka Hydraulic Ironworker
Model Hydracrop 110A
Year 1999
Specifications
Angle Shear:
"Non-deform cut" with no material lose
Angles square: 6" x 6" x 1/2"
Angles on 45 degree mitre (leg in): 3" x 3" x 5/16"
Bar Shear:
Channel: 3"
Channel: 4"
Plate Shear:
"Non-deform cut" with no material lose
Flat bar: 24" x 5/8" or 16" x 3/4" or 12" x 1"
Blade length: 24"
Punch:
Capacity: 120 Tons
Punching capacity: 1-1/2" thru 3/4" - 1-5/16" thru 1"
Throat depth: 12"
Quick change punch holder
Full stroke or jog mode
Notcher:
Thickness: 1/2"
Depth: 3-1/2"
Width: 2"
Equipped With:
Section shear blades for angles with patented non-deform cutting action with capability
of cutting equal and unequal leg angles at both 90 and 45 degress (leg in only).
Bar shear blades for 3" & 4" Channel
Flat bar blades (non-deform)
Rectangular coper notcher
Two-cylinder operaiton with two remote foot pedals and with hydraulics which will allow
simultaneous operation (Independently controlled) of punch and shearing stations (both
cylinders) to the total operating tonnage of machine.
Quick changle punch holder, keyed for shaped tooling
Support and mitre table for plate shear
3/60/220/440 motor and controls. Low voltage at the controls
A structural die holder is provided to allow the punching of the flanges in channels and I-Beams
Price:$19,500.00
Delivery: Stock, Subject to Prior Sale
Terms: Net before Shipment
F.O.B.: Little Rock, Arkansas
Sincerely,
Sales
SMF & Machine Tools
ALL MACHINES ARE SUBJECT TO PRIOR SALE. EVERY MACHINE, UNLESS OTHERWISE SPECIFIED, IS OFFERED SUBJECT TO OUR GUARANTEE THAT IF FOUND TO BE MECHANICALLY UNSATISFACTORY WITHIN 30 DAYS AFTER SHIPMENT, SAME MAY BE RETURNED, FREIGHT PREPAID FOR FULL CREDIT. ALL MACHINES RETURNED TO US MUST BE IN AS GOOD A CONDITION AS WHEN SHIPPED.
Return to Available Tools